Hot Waterblasters
(Steam Cleaners) in Christchurch
Tackle grease, grime, mould and stubborn stains with our range of hot steam cleaners — available in petrol, electric, single and three phase models.
Petrol Steam Cleaners
Hot Water Petrol Pressure Cleaner
122 HOT4013C-HE
Information
BAR’s most popular hot water unit — delivering 4,000 PSI at 15 litres per minute with temperatures up to 93°C. Powered by a 13hp Honda GX390 with electric start and an Italian Comet pump, this USA-built machine is a serious workhorse for heavy-duty industrial and commercial cleaning applications.
Performance
- 4,000 psi @ 15 L/min
- 93°C Max Temperature
- Manufactured in USA
Engine
- Honda GX390 13 hp Engine
- Electric Start
- 18 Amp Charge
Pump
- Comet ZWD4040 Italian Pump
- Direct Drive
- External Unloader Valve
- Built in Italy
Frame
- Caged Roll Frame
- Weight 240 kg
Accessories included
- 15 m of hose, spray gun & lance with 5 nozzles, 20% chemical injector with quick assembly
- Supplied ready to go
Hot Water Petrol Pressure Cleaner
122 HOT4015RGE
Information
A powerful petrol-driven hot water unit delivering 4,000 PSI at 15 litres per minute with temperatures up to 93°C. Powered by a 15hp Powerease engine with electric start and paired with an AR pump, this USA-built machine is built tough for demanding commercial and industrial hot water cleaning tasks.
Perfomance
- 4000 PSI @ 15 L/min
- 93°C Max Temperature
- Manufactured in USA
Engine
- Powerease 15 HP Engine
- Electric Start
- 18 Amp Charge
Pump
- AR Pump
- Direct Drive
- Built in Unloader Valve
- Built in China
Frame
- Caged Roll Frame
- Weight 240 Kg
Accessories included
- 15 M of hose, spray gun & lance with 5 nozzles, 20% chemical injector with quick assembly
- Supplied ready to go
Electric Single Phase Steam Cleaners
Hot Electric Pressure Cleaner
107 KTX3.10
Information
A compact yet capable hot water pressure cleaner delivering 2,175 PSI at 10 litres per minute and temperatures up to 110°C — higher than most comparable machines. Powered by a low-RPM Comet motor pump and featuring a high-efficiency diesel burner, built-in detergent tank, and 16L diesel tank, it’s a self-contained unit ready for serious cleaning work.
Features
- Separate motor fan for the vertical high-efficiency boiler and quality diesel pump. This machine is built with a high-efficiency burner and can generate higher temperatures, up to 110°C, compared to similar machines
- Diesel alarm indicator on panel control
- Delayed Total stop
- Electronic pc board will work in 24 V
- The machine will have on the panel control pressure gauge.
- 10 m rubber hose R1
- Diesel tank 16 L
- Detergent built-in tank (4.2 L) for indirect suction
- Comet gun GH301
Specifications
- Performance: 2,175 psi @ 10 L/min
- Single Phase: 240 V 50 Hz Single phase, with 5 m cable and 15 A AU plug
- Comet Motor Pump: Low 1,450 RPM with LWK pump like KP Pro 3.10 m
- Item size – 80 cm x 65 cm x 102 cm
- Item weight – 95 kg
- Water Temperature: 0-110°C
Hot Electric Pressure Cleaner
108 HOT12/11 LA
Information
An Italian-made electric hot water pressure cleaner delivering 1,750 PSI at 11 litres per minute with adjustable temperatures up to 100°C. Built around a Nicolini electric motor and Annovi Triplex piston pump, its stainless steel wrap boiler, 24V low-tension controls, and independent heat ventilation motor make it a safe, reliable choice for professional hot water cleaning.
Features
- Stainless Wrap Boiler
- Thermostat for Temperature Adjustment
- Bypass Valve
- Low Pressure Detergent Injection
- Heat Ventilation by Independent Electric Motor
- Steam Valve
- 24 V Low Tension Electrical Controls
- Manufactured in Italy
- Supplied Ready to Go
Performance
- 1,750 PSI @ 11 L/min
- 30°C – 100°C Max Temperature
Motor
- 2.2 kW / 240 V Electric Motor from Nicolini
- 15 A Outlet
Pump
- Annovi Triplex RC11.17 Piston Pump
- 1,440 RPM Pump Speed
Frame
- Stainless Steel Cover
- Painted Steel Chassis
- Weight 90 kG
- Dimensions: H 800 x W 520 x L 990
Accessories included
- 10 m of Hose, Spray Gun & Lance with Nozzle
Hot Electric Pressure Cleaner
107 KP3.10 PRO
Information
A fully self-contained Italian-made electric hot water pressure cleaner delivering 2,030 PSI at 10 litres per minute and temperatures up to 90°C. Featuring a built-in 15L fuel tank, detergent tank, large rubber wheels, and foldable handles, this mobile unit is designed for easy transport and hassle-free operation on the job.
Features
- 15 L capacity fuel tank with level float and fill up filter
- 4 pole (1,400 RPM) motor with thermal protection
- EASY-START device / Total Stop device
- Regulated low-pressure detergent suction
- Safety valve for boiler protection
- Boiler thermal protection
- Rotary On-Off switch
- Temperature setting thermostat
Performance
- 2,030 PSI @ 10 L/min
- Manufactured in Italy
Engine
- 240 V Electric Motor
- 2.0 kW Power
- 15 A Outlet
Pump
- Comet LW-K Plunger Pump
- 1,400 RPM Pump Speed
- 90°C Max Temperature
- Built in Italy
Frame
- Mobile Unit with Large Rubber Wheels
- Built-In fuel & detergent tanks
- Front & Rear Bumpers
- Closeable handles for transport
- 95 kg
Accessories included
- 10 m of hose, spray gun & lance with nozzle
- Supplied ready to go
Powerwash Gold Base Steam Water Blaster
PWGB120/11
Information
The Powerwash Gold Base delivers 1,710 PSI at 11 litres per minute, built around a long-life 1,450 RPM pump for reliable, continuous performance. With delayed total stop, low fuel cut-off, low-pressure chemical injection, and a 10m industrial hose with gun and lance included, it’s a practical and dependable steam water blaster for everyday professional use.
Features
- 1,450 RPM long-life pump
- Delayed total stop
- 1-hour shutdown
- Micro-leak protection
- Steam stage capability
- High-pressure chemical injection
- Stainless steel cover
Performance
- 1,740 PSI @ 11 L/min
Engine/Motor
- 240V single phase electric motor
- 15A outlet
Pump
- Long-life 1,450 RPM pump
- Delayed total stop system
- Micro-leak low water cut-out
Frame
- Stainless steel cover
- Mobile unit
Spitwater Hot/Cold Electric Waterblaster
10-120H
Information
Spitwater high pressure water cleaners are specifically designed to solve all problems relating to washing, degreasing, descaling and disinfecting in a wide range of commercial and industrial situations. Their main applications are in the cleaning, building, transport, light and heavy manufacturing and primary industries.
Features
- Designed and manufactured in Australia (Albury factory)
- Fully adjustable detergent with 5L detergent bottle
- Cooling tank with full 100% bypass pump protection
- Adjustable thermostat for hot water temperature control
- Diesel burner — electric fired
- Delayed total stop
- High pressure gun and double lance with adjustable pressure
- 10m high pressure hose included
Performance
- 1,800 PSI (120 Bar) @ 10 L/min
- Temperatures up to 90°C
Motor
- Italian 2-pole electric motor: 3hp / 2.2kW
- Speed: 2,800 RPM
- Power: 240V / 1 phase / 15A plug
Pump
- Interpump with ceramic pistons and brass head
- Crankshaft piston pump
- Full 100% bypass cooling protection
Frame
- Powder coated zinc annealed chassis, resistant to corrosion
- Weight: 127kg
- Four solid wheels
Spitwater Hot/Cold Electric Waterblaster
SW110
Information
Spitwater’s SW110 Industrial Single Phase Hot/Cold water pressure washer is designed for demanding Heavy duty use, ideal for Transport, agriculture, construction and the food industry where cleaning of grease and grim is required. The Italian Interpump with Ceramic Pistons and Brass pump head coupled to the Slow revving 1450RPM Soga motor ensures your pressure washer is ready to handle the toughest of task’s. Spitwater’s unique break tank ensure the pump remains cool even in buy pass. with huge 12L/min Cleaning power the SW110 will have you ripping though grease and oil in no time.
Features
- Proudly Australian made
- Cooling tank (unique to Spitwater) — protects pump seals from overheating during bypass, ensuring longer pump life and less maintenance
- Shut-down timer
- Fully adjustable detergent injector with 10L detergent bottle
- Horizontally mounted through-burn heating coil — less sooting
- Diesel burner — electric fired
- Seamless mild steel heating coil
- Italian 10m high pressure hose
- Italian gun, back and dual front part of lance included
Performance
- 1,650 PSI (110 Bar) @ 12 L/min
- EWP pressure: 2,400 PSI (160 Bar) with Rotojets
- Water temperature outlet: up to 95°C (up to 150°C in steam mode with optional steam kit)
- Fuel consumption: 5 kg/h
- Fuel tank capacity: 11L
Motor
- Italian 4-pole electric motor: 3hp / 2.2kW
- Speed: 1,450 RPM
- Power: 240V / 1 phase / 15A plug
- Current: 13A
Pump
- Interpump with ceramic pistons and brass head
- Full 100% bypass cooling tank protection
- 1,450 RPM slow-speed pump for longer pump life
Frame
- Heavy-duty all-steel construction
- Stainless steel cover
- Four solid wheels
Spitwater Heating Cylinder Hot Water Attachment
SHW11
Information
The Spitwater Heating Cylinder converts your existing cold water pressure cleaner into a hot water machine, instantly. Just plug the Heating Cylinder into a normal 10 amp power point (or with the new 12v model connect to a suitable 12 volt supply), put some diesel into the tank, connect the hoses and you are ready to go, it’s that simple to have instant hot water.
Features
- All steel construction with Stainless steel cover
- 240 Volt -Single phase – 2 AMPS on 10 amp plug
- Four solid wheels
- 2 m high pressure connecting hose
- Inlet pressure filter
- Safety relief valve
- Adjustable thermostat
- Diesel burner – electric fired
- Proudly Australian made
Pump
- Cooling tank with full 100% by pass
- Shut-down timer.
- Fully adjustable detergent with 5L detergent bottle.
Heating coil
- Horizontally mounted through-burn, less sooting
Mild steel seamless pipe
- 3/8 inch diameter
- 47 m long
Electric Three Phase Steam Cleaners
Avant Professional Hot Water Pressure Cleaner
HOT2120A
Information
A heavy-duty Italian-made three-phase hot water pressure cleaner delivering 3,000 PSI at 21 litres per minute and temperatures up to 100°C. Built around an Interpump WS202 triplex piston pump and 7.5kW electric motor, with a stainless steel vertical boiler, flame control sensor, and 24V low-tension controls, this is a premium machine engineered for demanding industrial environments.
Features
- Bypass Valve
- Thermostat for temperature adjustment
- Stainelss steel vertical boiler with Flame Control Sensor
- Ventilation by independant electric motor
- 24V Low tension electrical controls
- Detergent injection at high pressure
- Stainless Water Tank
- Steam Valve
Perfomance
- 3000 PSI 21 Litres per Minute
- Manufactured in Italy
Motor
- 415V Electric Motor 1440 Rpm
- 7.5kW / 10.0HP Power
Pump
- Interpump WS202 Italian Triplex Piston Pump
- 1440 RPM Pump Speed
- 100°C Max Temperature
- Built in Italy
Frame
- AISI 304 Stainless Steel Casing
- Painted Steel Frame
- Weight 170Kg
- H880 x W610 x L1100mm
Accessories included
- 10 Metres of hose, spray gun & lance with nozzle
- Supplied ready to go
Avant – Maer Hot Electric Pressure Cleaner
108 HOT20/12 L
Information
A robust Italian-made three-phase hot water pressure cleaner delivering 2,900 PSI at 12 litres per minute and temperatures up to 100°C. Built around an Interpump W140 triplex piston pump and housed in a stainless steel casing, its 32L fuel tank, high-pressure detergent injection, and comprehensive safety features make it a dependable choice for intensive industrial cleaning.
Features
- Pump comes with bypass valve, safety valves, and pressure switch
- Thermostat for Temperature Adjustment
- Stainless steel vertical wrap boiler and cover
- Heat ventilation by independent electric motor
- 24 V Low Tension Electrical Controls
- Steam Valve
- Stainless Water Break Tank
- High Pressure Detergent Injection
- Low level fuel cut-out with burner stop
- Fuel Tank capacity at 32 Litres
- Dumper on 3000 Psi models
Perfomance
- 2900 Psi @ 12 L/min
- Manufactured in Italy
Motor
- 415 V Electric Motor @ 1440 Rpm
- 4.0 Kw / 5.5 Hp
- Three Phase
- 20 A Plug Required
Pump
- Interpump W140 Italian Triplex Piston Pump
- 1440 Rpm Pump Speed
- 30°C – 100°C Max Temperature
- Built in Italy
Frame
- AISI 304 Stainless Steel Casing
- Painted Steel Frame
- Weight 90 Kg
- Size: H 800 x W 520 x L 990
Accessories included
- 10 M of Hose, Spray Gun & Lance with Nozzle
- Supplied Ready to Go
Bar Hot Pressure Cleaner - Smart
108 HOT17/13 SC
Information
The SMART range represents the next generation of stainless steel hot water pressure cleaners, delivering 2,465 PSI at 13 litres per minute and temperatures up to 80°C. Powered by a 4.0kW three-phase electric motor and Comet pump, it features an advanced suite of automatic safety systems — including dry-run protection, voltage interruption stop, and fuel cut-off — making it one of the safest and most intelligent machines in its class.
Features
- SMART range represents the new generation of stainless steel hot high pressure washers.
- 430 stainless steel cover and frame
- AUTOMATIC STOP standard.
- Built-in fuel tanks.
- Detergent suction and dispending in low pressure.
- Vertically boiler IN STAINLESS STEEL positioned with air cooling, cooling fan motor with independent control and adjustable combustion optimizer.
- Bottom boiler in refractory cement (thickness of 4 cm), resistant to thermal shock.
- Steel coil.
Perfomance
- 2465 PSI @ 13 Litres per Minute
- 30°C – 80°C Max Temperature
Motor
- 4.0kW / 415v Electric Motor
- Outlet Plug not included
Pump
- Comet LW-K3525
- 1450 RPM Pump Speed
Frame
- Stainless Steel Cover
- Painted Steel Chasis
Accessories included
- H.P. hose 5/16″ 10 m
- Water nozzle 25°
- Gun with protecion
- Lance with detergent adjusting head
Powerwash Gold Base Steam Waterblaster
200/15 - 200/21
Information
A professional hot water pressure cleaner built around a 1,450 RPM group pump motor with double bearings, ceramic pistons, connecting rods and camshaft. Available in three performance configurations, it features delayed total stop, micro-leak one-hour auto shutdown, high-pressure chemical injection, steam stage capability, and 24V low-tension electrical controls — delivering reliable, safe, and versatile performance for demanding commercial applications.
Features
- 1,450 RPM long-life pump with double bearing motor
- Delayed total stop
- One-hour shutdown
- Low fuel cut-off
- Low pressure chemical injection
- High pressure chemical injection
- Micro-leak low water cut-out
- Steam stage valve
- Hot and cold water capability
- 10m industrial hose, industrial gun and lance included
- Stainless steel cover
Performance
200/15 model:
- 3,000 PSI @ 15 L/min
- Max temperature: 90°C (up to 140°C in steam mode)
200/21 model:
- 3,000 PSI @ 21 L/min
- Max temperature: 90°C (up to 140°C in steam mode)
Motor
200/15 model:
- 5.5kW / 7.5hp double bearing motor
- 415V / 3 phase / 50Hz
- Current: 13.25A
200/21 model:
- 7.5kW / 10hp double bearing motor
- 415V / 3 phase / 50Hz
- Current: 22A
Pump
- Interpump commercial pump with full ceramic pistons
- 1,450 RPM slow-speed pump
- Connecting rods and camshaft
- Bypass valve to regulate pressure
- Low pressure detergent suction via venturi system
Frame
- Stainless steel 430 mirror cover
- Heavy-duty steel construction
- Mobile unit
Powerwash Gold Plus Steam Waterblaster
250/25
Information
A professional hot water pressure cleaner built around a 1,450 RPM group pump motor with double bearings, ceramic pistons, connecting rods and camshaft. Available in three performance configurations, it features delayed total stop, micro-leak one-hour auto shutdown, high-pressure chemical injection, steam stage capability, and 24V low-tension electrical controls — delivering reliable, safe, and versatile performance for demanding commercial applications.
Features
- Full spec 1,450 RPM long-life pump
- Delayed total stop
- One-hour shutdown
- Micro-leak low water cut-out
- High pressure chemical injection
- Steam stage capability
- Hot and cold water capability
- 10m industrial hose, industrial gun and lance included
Performance
- 3,625 PSI (250 Bar) @ 25 L/min
- Max temperature: 90°C (up to 140°C+ in steam mode)
Motor
- 415V / 3 phase / 50Hz electric motor
- 1,450 RPM double bearing motor
Pump
- Full spec 1,450 RPM long-life pump with double bearing motor
- Ceramic pistons
- Connecting rods and camshaft
- Bypass valve to regulate pressure
- Low pressure detergent suction via venturi system
Frame
- Stainless steel cover
- Heavy-duty steel construction
- Mobile unit
Spitwater Hot/Cold Water Electric Waterblaster
SW201
Information
Spitwater’s SW201 Industrial Single Phase Hot/Cold water pressure washer is designed for demanding Heavy duty use, ideal for Transport, agriculture, construction and the food industry where cleaning of grease and grim is required. The Italian Interpump with Ceramic Pistons and Brass pump head coupled to the Slow revving 1450RPM Soga motor ensures your pressure washer is ready to handle the toughest of task’s. Spitwater’s unique break tank ensure the pump remains cool even in buy pass. with huge 15L/min at 3000PSI Cleaning power the SW201 will have you ripping though grease and oil in no time.
Features
- Proudly Australian made
- Cooling tank (unique to Spitwater) — protects pump seals from overheating during bypass, ensuring longer pump life and less maintenance
- Shut-down timer
- Fully adjustable detergent injector with 10L detergent bottle
- Horizontally mounted through-burn heating coil — less sooting
- Diesel burner — electric fired
- Seamless mild steel heating coil
- Italian 10m high pressure hose
- Italian gun, back and dual front part of lance included
Performance
- 3,000 PSI (200 Bar) @ 15 L/min
- EWP pressure: 3,825 PSI (255 Bar) with Rotojets
- Water temperature outlet: up to 90°C (up to 150°C in steam mode with optional steam kit)
- Fuel consumption: 5 kg/h
- Fuel tank capacity: 24L
Motor
- Italian 3-phase electric motor: 7.5hp / 5.5kW
- Speed: 1,450 RPM
- Power: 380–415V / 3 phase / 50Hz
- Current: 11.5A
Pump
- Interpump with ceramic pistons and brass head
- Full 100% bypass cooling tank protection
- 1,450 RPM slow-speed pump for longer pump life
- Connecting rods and camshaft
Frame
- Heavy-duty all-steel construction
- Stainless steel cover
- Four solid wheels
Industrial Cleaner - High Flow for Large Businesses
SW2021
Information
The Spitwater SW2021 is a heavy-duty Australian-made hot/cold water cleaner delivering 2,900 PSI at 21 litres per minute. Powered by a 10hp 415V electric motor with a low-speed Interpump ceramic piston pump, it’s built tough for demanding industrial applications with temperatures up to 90°C.
Features
- Interpump ceramic piston and brass head pump
- Water cooling tank
- Inlet water filter
- Pressure gauge
- 3-stage powder coated zinc annealed chassis
- Adjustable thermostat for hot water temperature control
- Bypass shutdown timer
Specifications
- 2,900 PSI pump pressure (4,200 PSI EWP optional)
- 21 litres per minute pump volume
- 415V 10hp electric motor
- 1,450 RPM low speed pump
- 20 amp 3-phase plug
- Temperatures up to 90°C
Standard Equipment
- 10m high pressure hose
- Insulated on/off pistol assembly
- Double lance assembly
- High & low pressure mode
- Adjustable chemical injector with bottle
- Bypass shutdown timer
- Operating and maintenance manual